How to Set Up LIFX Smart Switch 2 Button

Quick Answer

Install the LIFX Smart Switch 2 Button in-wall, connect it to your existing wiring, then pair it with the LIFX app over Wi-Fi—no hub required.

Step-by-Step Setup

1. Turn Off Power and Remove Old Switch: Flip the breaker for the switch circuit. Use a voltage tester to confirm no power. Unscrew and pull out the old switch, disconnecting the wires. Common mistake: forgetting to test for voltage. Always double-check even if the breaker is off.
2. Connect Wires to LIFX Switch: Identify line (usually black or red), neutral (white), and load (to light) wires. Connect line to L, neutral to N, load to the load terminal on the LIFX switch. Tighten screws securely. Common mistake: mixing line and load. Label wires with tape before disconnecting to avoid confusion.
3. Mount and Restore Power: Carefully push wires into the box, align the switch, and screw it in. Turn the breaker back on. The switch should light up (backlit). Common mistake: pinching wires behind the switch. Fold wires neatly to avoid pressure on connections.
4. Pair with LIFX App: Open the LIFX app on your phone. Go to 'Add Device' and select 'Switch'. Follow the prompts to connect the switch to your Wi-Fi network. Once paired, assign it a name and room. Common mistake: forgetting to have your phone on the same 2.4 GHz Wi-Fi band. Most LIFX devices only work on 2.4 GHz.
5. Configure Button Actions: In the app, tap on the switch. Assign each button to control a specific light, group, or scene. You can set single press, double press, or hold actions. Common mistake: not testing each press type. Try single, double, and hold to ensure they trigger correctly.

Product Details

• LIFX Smart Switch 2 Button White - Plastic: Installed in-wall with a sleek backlit design and haptic touch, the LIFX Smart Switch features two buttons for effortless control. The backlit design helps you find the switch in the dark, and haptic touch provides tactile feedback so you know when you've pressed it.