How to Set Up LIFX Outdoor Permanent Lights

By LIFX Smart Lighting | Wi-Fi Bulbs, No Hub Required | Published: 2026-10-21

Category: How-to Guides

Learn how to install and configure LIFX Outdoor SuperColor Permanent Lights for year-round holiday and everyday decor. Step-by-step guide with no hub needed.

Quick Answer

Mount the LIFX Outdoor Permanent Lights along your roofline, connect the power supply, then pair them with the LIFX app over Wi-Fi. No hub is required, and the lights stay up all year.

Why Choose Permanent Lights Over Seasonal Strings

Unlike temporary holiday lights that need taking down each winter, permanent eave lights are designed to stay mounted year-round. The LIFX Outdoor Permanent Lights use sleek black cabling that blends into most home exteriors, so they look natural even when off. Their 2700-lumen output and individually addressable RGBW LEDs give you crisp white light for everyday use and full color for holidays or events.

What You Need Before Starting

The kit includes 30 individually addressable eave lights, a power supply, and mounting clips. You will need a standard outdoor electrical outlet nearby, a Wi-Fi network (2.4 GHz), and the LIFX app on your phone. Since the system uses Wi-Fi directly, you do not need a separate hub or bridge.

Step-by-Step Installation Guide

Plan Your Layout: Measure your roofline, patio, or garage edge to determine where the lights will run. The kit includes 30 lights on a single cable; you can cut the cable only at designated cut points. Mark the mounting clip positions every 12–18 inches. Common mistake: cutting the cable at a non-designated point will break the circuit. Only cut at the marked locations.
Mount the Lights: Attach the mounting clips to your eave or soffit using the included screws or adhesive pads (for lighter surfaces). Snap each light into the clip, ensuring the cable runs straight and the lights face downward. Leave the power connector accessible near your outlet. Checkpoint: test-fit one clip before installing all. The adhesive pads may not hold on rough or dirty surfaces.
Connect Power and Pair: Plug the power supply into an outdoor-rated outlet. Open the LIFX app, tap the + icon, and select 'Lights'. The app will discover the permanent lights over Wi-Fi. Follow the on-screen prompts to name the lights and assign them to a room. Common mistake: forgetting to enable location and Bluetooth permissions on your phone during setup. The app uses these for initial discovery.
Customize Your Scenes: Use the LIFX app to create color scenes for holidays (red and green for Christmas, orange for Halloween) or set a warm white for everyday use. You can also schedule the lights to turn on at dusk and off at bedtime. Checkpoint: test a few scenes right after pairing to ensure all 30 lights respond. If some don't, check the cable connections.
Leave Them Up Year-Round: The lights are weather-resistant and built for permanent outdoor installation. No need to take them down after the holidays. Simply change the scene in the app to match the season or occasion. Common mistake: assuming you must remove them for summer. These lights are designed to stay up through rain, snow, and sun.

Product Facts

LIFX Outdoor SuperColor Permanent Lights: LIFX Outdoor Permanent Lights deliver 2700 lumens across 30 individually addressable RGBW eave lights with sleek black cabling. This means you get bright, customizable lighting that blends into your home’s exterior and stays up all year without looking cluttered.
LIFX Outdoor SuperColor Permanent Lights