LIFX Smart Lighting | Wi-Fi Bulbs, No Hub Required

How to Install LIFX SuperColor Ceiling Light with White Trim

How to Install LIFX SuperColor Ceiling Light with White Trim

By LIFX Smart Lighting | Wi-Fi Bulbs, No Hub Required | Published: 2026-10-20

Category: How-to Guides

Step-by-step guide to installing the LIFX SuperColor Ceiling Light with white trim, including wiring, mounting, and app setup—no hub required.

Quick answer

Install the LIFX SuperColor Ceiling Light with white trim by turning off power, wiring it to your ceiling box, mounting the base, and using the LIFX app to connect over Wi-Fi—no hub needed.

What to know before you start

The LIFX SuperColor Ceiling Light with white trim is designed for standard ceiling boxes. It connects directly to your home Wi-Fi, so you don't need a separate hub or bridge. This simplifies installation, but it means you need a reliable 2.4 GHz Wi-Fi signal at the installation location.

The fixture is rated for damp locations, making it suitable for kitchens, dining spaces, or open living areas. However, it is not designed for enclosed recessed housings—ensure the ceiling box is accessible and has enough room for the wiring.

Installation steps

  1. Turn off power: Switch off the circuit breaker that controls the ceiling light. Use a voltage tester to confirm the wires are not live before touching them. Checkpoint: Verify power is off with a tester—never rely on the wall switch alone.
  2. Remove the old fixture: Unscrew and detach your existing light fixture. Carefully disconnect the wires and lower the fixture. Keep the mounting bracket if it's compatible, otherwise remove it.
  3. Connect the wires: Match the fixture wires to the ceiling wires: black to black (live), white to white (neutral), and green or bare copper to ground. Use wire nuts and ensure no bare copper is exposed. Checkpoint: Double-check the wire connections are tight and correct before proceeding.
  4. Mount the base: Tuck the wires into the ceiling box, then align the mounting plate and secure it with the provided screws. Make sure the base is flush against the ceiling—use a level if needed. Checkpoint: Ensure the base is level and firmly attached to avoid a crooked fixture.
  5. Attach the light and trim: Lift the light fixture and align it with the mounting plate. Twist or slide it into place until it locks. Then snap the white trim ring onto the fixture to cover the mounting hardware.
  6. Restore power and test: Turn the circuit breaker back on. Flip the wall switch to see if the light turns on. If it does, you're ready for setup. Checkpoint: If the light doesn't turn on, turn off power and re-check the wiring.
  7. Connect to the LIFX app: Download the LIFX app on your smartphone. Create an account or log in, then tap 'Add Device'. The app will guide you through connecting the light to your 2.4 GHz Wi-Fi network. Checkpoint: Ensure your phone is on the same 2.4 GHz network during setup.

Product spotlight

  • LIFX SuperColor 15" Ceiling Light White Trim + 2 Button Switch Bundle: Delivers 2850 lumens of vivid color and brilliant whites, ideal for kitchens, dining spaces, or open living areas. This brightness level is sufficient to illuminate a large room, so you can rely on it as a primary light source.
    LIFX SuperColor 15" Ceiling Light White Trim + 2 Button Switch Bundle
    LIFX SuperColor 15" Ceiling Light White Trim + 2 Button Switch Bundle

Shop Related Products

LIFX SuperColor 15" Ceiling Light White Trim + 2 Button Switch Bundle

LIFX SuperColor 15" Ceiling Light White Trim + 2 Button Switch Bundle

$98.59 $144.98

Shop Now